CABLE JOINTING AND SEALING

Our advantages

Beyond expectations 

we are aimed at bring reliable cable jointing and sealing SOLUTIONS.

We are inspired to do great work because we truly believe in what we do and we put our heart and soul into it.

End cap

HSEC, heat shrink end caps are made from radiation cross-linked polyolefin and coated with spiral hot melt adhesive, which insulates and seals off wire and cable terminations to protect against abrasion, moisture, chemicals, and corrosion. The end caps are UV resistant and consist of adhesive inside to create air tight seals. The heat shrink end cap material and design make it perfect to seal electrical connections that need superior insulation and water proof protection.

 

Test Items

Test Method

Test Requirements

Tensile strength 

ASTM D 2671 

10MPa min.

Ultimate elongation 

ASTM D 2671 

200% min.

Tensile strength after

ASTM D 2671 

10MPa min.

Aging at 150℃ for 168hrs

Ultimate elongation after

ASTM D 2671

100% min.

Aging at 150℃ for 168hrs

Heat shock at 200℃/30min

ASTM D 2671

No cracking, dropping

Density

ASTM D 792

1.2~1.3g/cm3

Dielectric strength

IEC 60243

10kV/mm(2.5mm) min. 

Volume resistivity

ASTM D 2671

1012Ω.cm min.

Low temperature flexibility

ASTM D 2671 Proc.C

No cracking 

-40℃/4hrs

Permittivity

ASTM D 150

3 (nom.)

Tracking resistance                           

ASTM D 2303

No tracking

D* = Inner diameter as supplied

d* = Inner diameter after fully recovered