CABLE JOINTING AND SEALING

Our advantages

Beyond expectations 

we are aimed at bring reliable cable jointing and sealing SOLUTIONS.

We are inspired to do great work because we truly believe in what we do and we put our heart and soul into it.

Anode Cap

Anode cap is designed to seal and protect the critical connection between the lead wire and anode.

It provides stress relief, moisture proofing and electrical insulation at the lead wire exit point. It is the ideal solution to the problem of premature system failure due to corrosion causing lead wire to come out of the anode.

It is made from a highly Cross-linked Polyolefin material. Rubber based mastic coating inside the cap adheres to Anode material and wire insulation which provides water tight sealing according to IP 68 (Ingress Protection). 


Test Items

Test Method

Test Requirements

Tensile strength 

ASTM D 2671 

10MPa min.

Ultimate elongation 

ASTM D 2671 

200% min.

Tensile strength after

ASTM D 2671 

10MPa min.

Aging at 150℃ for 168hrs

Ultimate elongation after

ASTM D 2671

100% min.

Aging at 150℃ for 168hrs

Heat shock at 200℃/30min

ASTM D 2671

No cracking, dropping

Density

ASTM D 792

1.2~1.3g/cm3

Dielectric strength

IEC 60243

10kV/mm(2.5mm) min. 

Volume resistivity

ASTM D 2671

1012Ω.cm min.

Low temperature flexibility

ASTM D 2671 Proc.C

No cracking 

-40℃/4hrs

Permittivity

ASTM D 150

3 (nom.)

Tracking resistance                           

ASTM D 2303

No tracking